Electromagnetic Flow Measuring System

Flow rate measurement of liquids with solids content or inhomogeneous liquids

Your benefits

Promag measuring devices offer you cost-effective flow measurement with a high degree of accuracy for a wide range of process conditions.

The Proline transmitter concept comprises of:

• High degree of efficiency due to the modular device and operating concept
• Software options for: electrode cleaning, advanced diagnostics, calculation of mass flow and solids content

The robust Promag S sensors offer:

• Universal devices, even for difficult fluids
• Excellent accuracy and repeatability
• High resistance to abrasion thanks to industry-optimized linings and measuring electrodes
• Optimum operational safety due to advanced, permanent self-diagnosis
• Simple installation and commissioning
• Insensitive to vibration
• No pressure loss

Electromagnetic flowmeter for bidirectional measurement of liquids with a minimum conductivity of ≥5 μS/cm - in particular fluids with solids, and fluids which are abrasive, inhomogeneous or tend to build-up, for example:

 

• Chemical/mechanical pulps, paper pulp or wood pulp with solids contents up to 15 Vol.-%
• Fruit mashes, fruit concentrates and final products (salad dressings, soups with vegetable pieces)
• Slurries containing high amounts of sand or stone with an abrasive effect, e.g. ore slurry or mortar
• Chemically inhomogeneous fluids (e.g. additives)
• Thick wastewater sludges

 

• Flow measurement up to 9600 m³/h (42 267 gal/min)
• Can be used up to +180 °C (+356 °F) and max. 40 bar (580 psi)
• Fitting lengths as per DVGW/ISO

Application-specific linings and electrodes:

• Natural rubber, hard rubber, polyurethane, PTFE or PFA linings
• Flat, bullet nose, neck, bow or brush electrodes

Approvals for hazardous area:

• ATEX, FM, CSA

Connection to process control system:

• HART, PROFIBUS DP/PA, FOUNDATION Fieldbus

Production time:
Endress+Hauser works to a defined standard production time (from order entry to goods issue) depending on the variant of the Promag 55S.
Production times can be confirmed via your contact person or via the online shop.

Distribution:
Endress+Hauser will ship your order direct to your delivery address. In certain cases express or emergency shipments can be made on request.

Track & Trace:
Check your order status online using your reference number or the Endress+Hauser order confirmation number.

Spare Parts Logistics:
Spare parts are handled as standard products with a short standard delivery time. On request we deliver on shortest possible delivery time (extra charge).