Levelflex M FMP40

Continuous Level Transmitter for

- Level Measurement in Bulk Solids and Liquids

- Interface Measurement in Liquids

Your benefits

Probes are available with threaded process connections

from ¾" and flanges from DN40 (1½").

• Rope probes, above all for measurement in bulk solids, measuring range up to 35 m.

• Rod probes, above all for liquids.

• Coax probes, for liquids.

• Simple, menu-guided onsite operation with four-line plain text display.

• Onsite envelope curve on the display for easy diagnosis.

• Easy remote operation, diagnosis and measuring point documentation with the free operating program supplied.

• Optional remote display and operation.

• With coax probes the measurement is independent of internals in the tank and of the installation in the nozzle.

• Probe rod and probe rope can be replaced/shortened.

• Approvals: ATEX, FM, CSA, TIIS, NEPSI, IECEx.

Level measurement

Continuous level measurement of powdery to granular

bulk solids e.g. plastic granulate and liquids.

• Measurement independent of density or bulk weight, conductivity, dielectric constant, temperature and dust e.g. during pneumatic filling.
• Measurement is also possible in the event of foam or if the surface is very turbulent.

• The HART with 4 to 20 mA analog, PROFIBUS PA and FOUNDATION Fieldbus protocols are available for system integration.

• Application in safety related systems (overspill protection) with requirements for functional safety up to SIL 2 in accordance with IEC 61508/IEC 61511-1.

• WHG approval.

Interface measurement

Continuous measurement of interfaces between two liquids with very different dielectric constants, such as in the case of oil and water for example.

• Measurement independent of density, conductivity and temperature.
• Electronics version for the simultaneous measurement of the level of interfaces and the total level in liquids. The HART with 4 to 20 mA analog protocol is available for system integration.
• Special version for the measurement of the level of interfaces at a constant total level. The PROFIBUS PA and FOUNDATION Fieldbus protocols are available for system integration.

Production time:
Endress+Hauser works to a defined standard production time (from order entry to goods issue) depending on the variant of the Levelflex M FMP40.
Production times can be confirmed via your contact person or via the online shop.

Distribution:
Endress+Hauser will ship your order direct to your delivery address. In certain cases express or emergency shipments can be made on request.

Track & Trace:
Check your order status online using your reference number or the Endress+Hauser order confirmation number.

Spare Parts Logistics:
Spare parts are handled as standard products with a short standard delivery time. On request we deliver on shortest possible delivery time (extra charge).